B452R  ULTRASONIC VAPOR DEGREASER

FREE TECHNICAL SUPPORT ON ANY CLEANING APPLICATION !!!

OVERVIEW

The Branson B452R Ultrasonic Vapor Degreaser is the latest in a series of environmentally sound, cost effective precision degreasers. It integrates 50 years of degreasing experience with the demanding needs of a changing marketplace to offer you a functional solvent solution to your cleaning needs. Similar in operation to a traditional two sump unit, it incorporates all of the important environmental and safety features you need, including onboard compressors for both primary and sub-zero cooling. All controlsare clustered on a compact, front-mounted, digital control panel. It is ideal for use with low-cost solvents like trichloroethylene, perchloroethylene, and methylene chloride, as well as many of the newer materials including, HFC, HFE, N-propyl bromide and more.

ENVIRONMENTAL FEATURES

The B452R is designed to comply with Federal and local regulations on solvent emissions, an important environmental and economic consideration. Some of these features can also facilitate OSHA compliance. The unit includes, as standard, a number of engineered improvements designed specifically to minimize solvent losses. The following list details some of these more important features:

• Freeboard ratio of greater than 120% to eliminate diffusion losses
• Sub-zero freeboard condenser to provide a cold air barrier minimizing fugitive losses.
• Primary condensing coil to condense the bulk of the vapors preventing them from reaching the sub-zero condenser
• Captured sliding coverto eliminate drafts and seal the unit during periods of inactivity
• Stainless plumbing for corrosion resistance
• Internal water separator keeps all solvent within the unit at all times
  
  
  
  

SAFETY FEATURES

In addition to the benefits associated with keeping solvent away from the operator, the B452R has many other features which contribute to safety and reliability. Key among these are:

• Low voltage controlsfor operator safety
• "Ready" lightto assure the unit is set to run
• Coolant indicator indicates the refrigeration equipment is functional
• High vapor level sensor to prevent accidental solvent boil off
• Heater Over Temp sensor to prevent solvent degradation and heater damage
  Early warning contamination indicator to signal the need for solvent replacement
  
  

Boil sump 10" X 12" X 8"D
Ultrasonic sump 10" X 12" X 8"D
Vapor zone 28.75"L X 15.25"W X 8.5"D
Overall 54.75" X 28.5" X 845" H
Solvent capacity 9.2 gallons
Recirculation 1 gpm @ 10m
Boil sump heat 2000W immersion heat
Distillation rate 7 gph
Load capacity 150# steel/hr
Ultrasonics 250W @ 40 kHz
Control voltage 24 volts
Input power 208 or 230V, 3ph, 25A

AMS - Branson - B452R TDS

AMS - 3M - Novec Electronic Cleaning Brochure