Electromagnetic interference (EMI) is all around us. EMI is created naturally from everyday sources such as lightning, rain, and even strong winds. Cosmic noise emitted by solar flares can cause EMI problems.
There are also man-made EMI sources to contend with.  Man-made EMI sources challenge the equipment designer and component engineer to find a solution to keep the signals coming to or going from their electronic system, clean and usable.

EMI Solutions, Inc. has assembled a large series of product families that provide EMI filtering and transient protection. It’s products are specifically designed to provide the best solutions to meet the increased performance demands levied during testing from MIL-STD-461, RTCA-DO-160, CISPRE, and CE Mark, etc. They offer filtering solutions from unique filter inserts to higher performing Pi filtered connectors.

Their designs now include a newly developed and performance tested combination Filtered and TVS protection connectors, which differ from anything available at present within the industry.

Their Chip Cap series inserts and connectors provide up to 45 dB of insertion loss with the ability to have capacitive filtering from 10pf to 47,000pf; while our Pi filtered connectors offer up to 75-80 dB of insertion loss in a wide variety of capacitance values.

The TVS components provide transient protection at the pin of the connector from 0.1 Joules up to 2 joules (configuration dependant); and they also offer the ability to selectively filter or TVS protect pins within an insert or a filtered connector on a pin by pin basis.

Why AMS Materials?
When you are working on a new system, speed to solution is critical.  By working with AMS Materials, LLC you are working with the best local resource to bring all the technical elements to bear on you problem with amazing efficiency.  We are leaders in this industry and OEM suppliers.  This means that when you deal with AMS and EMI Solutions, Inc., you are dealing with the source – not a reseller.