TWO-DIMENSIONAL ROBOT (TDR)

OVERVIEW
The Branson TDR Series two-dimensional robots are microprocessor or PLC based automated parts handling systems. Designed by cleaning people for use in cleaning operations, these units are ruggedly constructed and appropriate for use in either production or clean room environments. TDR Series transport systems are available in two weight ranges (up to15kg and up to 50kg) and a variety of heights to accommodate most production needs.

PROGRAMMABILITY
TDR Series transport systems can be programmed through any of three ways:

• Entering x/y coordinates into a hand-held keypad
• "Self - teaching" by walking the unit through the program using the hand-held keypad
• Downloading a previously stored program from a PC through the onboard RS-232 connector

Operating steps can be inserted, deleted, or replaced simply by using keystrokes. The microprocessor has the capacity to store up to 255 steps which can be divided among a maximum of ten programs. 

CONTROL FEATURES
The microprocessor is contained in a compact 19" rack-mountable control box. Located on the front of the box are: auto/manual mode selector, keypad pendant connector, RS-232 port, manual motor controls, an emergency stop switch, and LED display devices. LED displays indicate position and current activity as well as error codes if the self-diagnosing software senses problems.

EXPANDABILITY
Although a single TDR Transport head can dramatically increase process throughput, additional heads may be required for higher production now or in the future. Up to two additional heads can be added. Inter-head communication guarantees coordinated, troublefree operation even with complex applications. Standard units are 10 feet long with additional track and accessories available in 5 foot increments up to 40 feet maximum.

PRODUCTIVITY
There are many paths to productivity using TDR Series transport equipment. Units work essentially unattended for full production shifts improving throughput. The consistent nature of operation will reduce process rejects improving yield. With eight 5v input channels and four 24v output channels, the TDR can control cleaning equipment parameters or act interactively with shop floor integration programs. Variable speed horizontal movement allows tailoring to the specific cleaning application.




STANDARD FEATURES

• Load capacity of 15kg or 50kg plus fixture weight
• Ten foot standard track length
• Four-point basket pickup for stability
• Cantilevered pickup arm for cleanliness
• Dedicated microprocessor-based controls
• 19" rack mountable control box
• Large, bright LED readouts
• RS-232 port for use with a remote PC
• Keypad or "self-learn" programming
• Ten program registers for different processes
• Self-diagnostic electronics
• Four horizontal and four vertical speeds
• Electronic breaking for smooth operation
• Eight external input channels (5v)
• Four internal output channels (24v)
• Communications with Branson equipment

OPTIONS

• PLC to integrate process management and handling
• Up to two additional work heads
• Four additional output channels (24v)
• PC interface cabling
• Additional track length
• Alternate voltages
• Multi-program selector box

SPECIFICATIONS
 

AMS - Branson - TDR50

AMS - Branson - TDR15